Elevation LED / ELEVAT LED 3700 HFLI MPT AC WL6 597


Data Sheet

A high performance, semi-recessed, LED luminaire with 3700lm LED package. Electronic, DALI / DSI digital dimmable control gear. Body and reflectors: white painted steel (close to RAL9010). Diffuser: perspex frosted diffuser and polymethylmethacrylate axial prismatic lens. Wings: reeded opal acrylic. Suitable for lay-in (exposed tee 15 and 24mm) suspended ceilings. Suitable for pull-up (concealed tee) suspended ceilings using wedge brackets (supplied), fitted externally. Internal fit wedges for plasterboard to be ordered separately. Provision for gripple wire (not supplied) in the body. Electrical connection via panel mounted 6 pole Wieland connector, appropriate female connectors to be ordered separately. Class I electrical. IP20. Integral mini-sensa head for full presence, daylight and remote control. Complete with 4000K LED

Dimensions: 597 x 619 x 161 mm
Total power: 37 W
Weight: 5.6 kg
Luminaire efficacy: 100 lm/W

Mode selection
  • Posición de la lámpara:STD - estándar
  • Fuente de luz:LED
  • Flujo luminoso de luminaria*:3700 lm
  • Rendimiento luminoso de las luminarias*:100 lm/W
  • Lamp efficacy:100 lm/W
  • Índice de reproducción de los colores mín.:80
  • Temperatura de color correlativa*:4000 Kelvin
  • Tolerancia del lugar del color (initial MacAdam)*:3
  • Vida útil nominal media*:50000h L70 para 25°C
  • Balasto:1x HFI* Tridonic
  • Potencia de luminaria*:37 W Lambda = 0.95
  • Potencia en standby*:0.2 W
  • Control:DALIDSI regulable hasta 3%
  • Categoría de mantenimiento:D - Cerrado IP2X
  • LED
  • CE
  • 650°
  • IK03
  • IP20
  • Protection Class 1
  • Ta = 0 to +25


Photometric configuration


Use CalcExpress to quickly carry out quick online calculations of required indoor luminaire numbers for rectangular rooms. Enter the calculation parameters for your solution such as room dimensions, mounting height, height of the useful plane and required level of illuminance, and the site will instantly suggest a solution according to the light output ratio method.

Step 1: Technical data
Step 2: Room Data
Step 3: Result